南通嘉兴争做上海门户 谁将成为长三角版雄安？

Lork Group All Categories

Introduction

LORK is a alloy manufacturer with 20 years of manufacturing experience.

Titanium alloy has become an ideal manufacturing material for aircraft and engines due to its high strength,
good mechanical properties and corrosion resistance, but its poor machinability has long restricted its application to a large extent.
With the development of processing technology, titanium alloy has been widely used in the manufacture of parts such as the compressor section, engine cowl, exhaust device of aircraft engines and the manufacture of structural frame parts such as the beam spacer of aircraft.
TC4 titanium alloy has excellent corrosion resistance, small density, high specific strength and
better toughness and weldability and a series of advantages.and other sectors have been successfully applied.

Titanium alloys are divided into three main groups: alpha-phase, beta-phase, and alpha-beta-phase. Grade 23 Ti 6Al 4V ELI alloy is an alpha-beta wrought alloy. The ELI stands for extra low interstitial. For an alloy to be branded as an ELI product, it should be produced as such at the mill.

Titanium Ti 6Al 4V Alloy Application Industries

• Off-Shore Oil Drilling Companies

• Power Generation

• Petrochemicals

• Gas Processing

• Specialty Chemicals

• Pharmaceuticals

• Pharmaceutical Equipment

• Chemical Equipment

• Sea Water Equipment

• Heat Exchangers

• Condensers

• Pulp and Paper Industry

Ti 6Al 4V Titanium Alloy Chemical Composition

The chemical composition of grade 23 Ti 6Al 4V ELI alloy is outlined in the following table.

The physical properties of grade 23 Ti 6Al 4V ELI alloy are tabulated below.
 

The thermal properties of grade 23 Ti 6Al 4V ELI alloy are tabulated below.

• AMS 4907

• AMS 4931

• ASTM F136

• ASTM F467 (TI-5)

• ASTM F468 (5)

• ASTM F468 (S)

• MIL F-83142

• MIL T-9046

• MIL T-9047

• SPS M618

• AMS 4930

• AMS 4956

Lork Group Detection

Lork Group Company Introduction